About the ship stereotype cable eye splice ( Eye ring) The splicing method is introduced

by:SanTong     2021-02-04
Stereotype braided rope has been widely used in ship, but now the situation is: during the berthing operations, cable once badly worn, crew members rarely to splice an eye splice continue to use, so I summarized some practical experience to discuss with everybody in here!   First measured the size of the eye splice and writing position, and make the mark, and then spread out the rope into four shares, rub to consistent group 1 and 2 on the left side to rub to the same group 3, 4, on the other side of the plug in group 1, 2, pressure line with 1, 2, group into the strand of wear out at the same time, 3, 4 set of pressure in the rope be inserted again consistent with 3, 4 set of inserts to strand on wear out at the same time, also is to rub the consistent splice with inserted to the consistent by plugging the rope hole, this completes the beginning.   Turn an eye splice 180 degrees, will be the first group of splice ropes along the was underneath plug cord plugged into a forward, reproduce the 3 groups splice line along the was underneath plug cord plugged into a forward, 2, 4 set of the above method is also repeat, at this moment, a flower, according to the above method and then insert the second flower, at least four flower plug, completed, with firm rope head quarter or tape rope tightening around, cut qi can be measured the size of the eye splice and writing position, and make the mark, and then spread out the rope into four shares, rub to consistent group 1 and 2 on the left side to rub to the same group 3, 4, on the other side of the plug in group 1, 2, pressure line and 1, 2, group into consistent strand on wear out at the same time, 3, 4 set of pressure in the rope be inserted again consistent with 3, 4 set of inserts to strand on wear out at the same time, also is to rub the consistent splice with inserted to the consistent by plugging the rope hole, this completes the beginning.   Turn an eye splice 180 degrees, will be the first group of splice ropes along the was underneath plug cord plugged into a forward, reproduce the 3 groups splice line along the was underneath plug cord plugged into a forward, 2, 4 set of the above method is also repeat, at this moment, a flower, according to the above method and then insert the second flower, at least four flower plug, completed, with tied rope head quarter or tape rope tightening around, cut together. , 2, 4 set of the above method is also repeat, at this moment, a flower, according to the above method and then insert the second flower, at least four flower plug, complete. Cable for public use and features: use: suitable for ship dock and towing with cable used. Manufacturing: the use of polypropylene, polyethylene and nylon raw material after textile yarn and woven for twisting. Features: can float on the surface of the water; Not afraid moth, mildew resistance, corrosion resistance, resistance to friction; High strength, small elongation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...